NIR PET PVC Separator Machine
Product Description
NIR sorter machine is specially designed to separate the PVC/ PP/ PE/ ABS/ rubber from PET flake.
This plastic separator machine use near infrared technology to separate the PVC/ PP/ PE/ ABS/ rubber from PET flake by spectrum, typical capacity is 2t/h, sorting efficiency is 90-95%.
Operational Principle
Firstly, the raw material into the vibration hopper and will fall on the convener belt. At the end of the conveyor belt, the material will pass through the near infrared detection sensor and the background plate.
The near infrared lens sensor will receive the reflected light from the material, the control system will analyze those different reflected light and export the corresponding signal. The signal will enable the spay valve to spray out the waste material into waste collection container.
Technical Specification
| Product Name |
NIR PET PVC Separator Machine |
| Capacity |
2 Ton/Hour |
| Executing Unit |
240 |
| Voltage |
180~240V(50Hz) |
| Power of Main Machine |
3.5KW |
| Air Pressure |
0.6~0.8Mpa |
| Air Consumption |
3 m3/Min |
| Dimension(L*W*H) |
3510 x 2000 x 1990 (mm) |
| Weight |
1000(kg) |
| PVC sorting efficiency |
85-95%(size>3mm) |
Device Characteristic
* Infrared identification and mechanical separation of PVC, PP/PE bottle caps, rubber materials from PET flake;
* Typical capacity 2t/h, according to the PVC ratio;
* Typical removal efficiency of PVC from 90% to 96%;
* PVC content ratio can reaches or below 5PPM;
* High-speed near infrared sensor, recommended 3-24mm flake;
* PVC removal performed by precisely air jet arrays.
